[Support] ssh login ohne Passwort geht bei einem User nicht

Rainer Thieringer hsnews at web-me.de
Tue Aug 22 11:18:12 CEST 2006 

Hallo HS,
ich habe jetzt den gesamten Montag erfolglos damit verbracht, einen 
weiteren meiner Accounts auf ssh-login ohne Passworteingabe umzustellen. 
Was bei allen anderen Accounts geht, geht bei einem einfach nicht. 
Vielleicht kann mir jemand einen Tipp geben. Das Problem wurde soweit 
reduziert, dass das Verhalten auf pomo - also ohne externen Rechner - 
reproduzierbar ist. Die folgenden Usernamen sind natürlich alle deutlich 
abgeändert, die @ wurden durch (@@) ersetzt.


Symptom: vom Haupt-Account (xxx99) erfolgt ein ssh login auf den User 1 
(xxx99-acc01) und anschliessend auf User 2 (xxx99-acc00002). Der 
Haupt-Account hat in ~/.ssh die private (id_dsa, 0x600) und public 
(id_dsa.pub, 0x644) Keys. Der public key ist in den authorized_keys 
beider User eingetragen. Bei Login auf User 1 wird wie erwartet kein 
Passwort benötigt, bei User 2 kommt unerwartet und hartnäckig eine 
Passwortabfrage.

Die ssh Debugausgaben beim Login laufen erst beim Senden des public key 
auseinander:

----------- User 1: Gutfall -----------------
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-dss blen 433

----------- User 2: Schlechtfall -----------------
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: 
publickey,password,keyboard-interactive


Dieses Verhalten bleibt, wenn der Connect von einem anderen Server aus 
erfolgt. Es wurden verschiede Keys (rsa, dsa) mit ssh-keygen neu 
generiert und ausprobiert. Die Keys sind ohne Passphrase. An der Version 
der ssh Programme kann es nicht liegen, da das Verhalten auf pomo ja 
trotz gleicher Umgebung für zwei User unterschiedlich ist. Derzeit läuft 
User 2 sogar mit einer Kopie des .ssh Verzeichnisses von User 1, 
authorized_keys hat also exakt denselben Inhalt wie bei User 2. Die 
Rechte in .ssh sind wie folgt:

xxx99-acc01(@@)pomo:~$ ls -lsa .ssh
total 16
0 drwxr-xr-x   2 xxx99-acc01 xxx99   68 Aug 21 23:15 .
4 drwxr-x---  18 xxx99-acc01 httpd 4096 Aug  6 12:55 ..
4 -rw-r--r--   1 xxx99-acc01 xxx99 2986 Aug 21 19:47 authorized_keys
4 -rw-r--r--   1 xxx99-acc01 xxx99  231 Aug 21 23:15 known_hosts


xxx99-acc00002(@@)pomo:~$ ls -lsa .ssh
total 16
0 drwxr-xr-x   2 xxx99-acc00002 xxx99   68 Aug 21 23:17 .
4 drwxrwx---  12 xxx99-acc00002 xxx99 4096 Aug 21 23:17 ..
4 -rw-r--r--   1 xxx99-acc00002 xxx99 2986 Aug 21 23:17 authorized_keys
4 -rw-r--r--   1 xxx99-acc00002 xxx99  231 Aug 21 23:17 known_hosts


Für mich sind beide Accounts gleich eingerichtet, es sollte also 
funktionieren. Die für mich erkennbaren Unterschiede:
1. ich sehe gerade, dass der Verzeichniseintrage .. des User 1 der 
Gruppe httpd gehört. Hat aber wohl eher nichts zu sagen.
2. der User 2 war bis heute ein User mit /usr/bin/passwd als Shell und 
hat erst heute /bin/bash als Login-Shell erhalten. (Ich frage mich, ob 
da vielleicht vom HS robot beim Scannen der ~/etc/passwd und Umstellen 
irgendwas vergessen wird)

Anbei noch die kompletten Ausgaben der beiden ssh logins. Ich bin für 
jeden Tipp dankbar.

Liebe Grüße
Rainer Thieringer


-------------------- Mitschnitt für User 1 - Gutfall -------------------
xxx99(@@)pomo:~$ ssh -vvv xxx99-acc01(@@)xxx99.hostsharing.net
OpenSSH_3.8.1p1 Debian-8.sarge.4, OpenSSL 0.9.7e 25 Oct 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to xxx99.hostsharing.net [212.21.77.2] port 22.
debug1: Connection established.
debug1: identity file /home/pacs/xxx99/.ssh/identity type -1
debug1: identity file /home/pacs/xxx99/.ssh/id_rsa type -1
debug3: Not a RSA1 key file /home/pacs/xxx99/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/pacs/xxx99/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version 
OpenSSH_3.8.1p1 Debian-8.sarge.4
debug1: match: OpenSSH_3.8.1p1 Debian-8.sarge.4 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 Debian-8.sarge.4
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc(@@)lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc(@@)lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160(@@)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160(@@)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc(@@)lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc(@@)lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160(@@)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160(@@)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 122/256
debug2: bits set: 535/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/pacs/xxx99/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 1
debug3: check_host_in_hostfile: filename /home/pacs/xxx99/.ssh/known_hosts
debug3: check_host_in_hostfile: filename /etc/ssh/ssh_known_hosts
debug3: check_host_in_hostfile: match line 39
debug1: Host 'xxx99.hostsharing.net' is known and matches the RSA host key.
debug1: Found key in /home/pacs/xxx99/.ssh/known_hosts:1
debug2: bits set: 501/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/pacs/xxx99/.ssh/identity ((nil))
debug2: key: /home/pacs/xxx99/.ssh/id_rsa ((nil))
debug2: key: /home/pacs/xxx99/.ssh/id_dsa (0x808c5a8)
debug1: Authentications that can continue: 
publickey,password,keyboard-interactive
debug3: start over, passed a different list 
publickey,password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/pacs/xxx99/.ssh/identity
debug3: no such identity: /home/pacs/xxx99/.ssh/identity
debug1: Trying private key: /home/pacs/xxx99/.ssh/id_rsa
debug3: no such identity: /home/pacs/xxx99/.ssh/id_rsa
debug1: Offering public key: /home/pacs/xxx99/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-dss blen 433
debug2: input_userauth_pk_ok: fp 
70:ae:9e:19:db:dd:c0:88:7e:ea:08:dc:d0:3e:9b:2d
debug3: sign_and_send_pubkey
debug1: read PEM private key done: type DSA
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: ssh_session2_setup: id 0
debug2: channel 0: request pty-req
debug3: tty_make_modes: ospeed 38400
debug3: tty_make_modes: ispeed 38400
debug3: tty_make_modes: 1 3
debug3: tty_make_modes: 2 28
debug3: tty_make_modes: 3 127
debug3: tty_make_modes: 4 21
debug3: tty_make_modes: 5 4
debug3: tty_make_modes: 6 0
debug3: tty_make_modes: 7 0
debug3: tty_make_modes: 8 17
debug3: tty_make_modes: 9 19
debug3: tty_make_modes: 10 26
debug3: tty_make_modes: 12 18
debug3: tty_make_modes: 13 23
debug3: tty_make_modes: 14 22
debug3: tty_make_modes: 18 15
debug3: tty_make_modes: 30 0
debug3: tty_make_modes: 31 0
debug3: tty_make_modes: 32 0
debug3: tty_make_modes: 33 0
debug3: tty_make_modes: 34 0
debug3: tty_make_modes: 35 0
debug3: tty_make_modes: 36 1
debug3: tty_make_modes: 37 0
debug3: tty_make_modes: 38 1
debug3: tty_make_modes: 39 0
debug3: tty_make_modes: 40 0
debug3: tty_make_modes: 41 0
debug3: tty_make_modes: 50 1
debug3: tty_make_modes: 51 1
debug3: tty_make_modes: 52 0
debug3: tty_make_modes: 53 1
debug3: tty_make_modes: 54 1
debug3: tty_make_modes: 55 1
debug3: tty_make_modes: 56 0
debug3: tty_make_modes: 57 0
debug3: tty_make_modes: 58 0
debug3: tty_make_modes: 59 1
debug3: tty_make_modes: 60 1
debug3: tty_make_modes: 61 1
debug3: tty_make_modes: 62 0
debug3: tty_make_modes: 70 1
debug3: tty_make_modes: 71 0
debug3: tty_make_modes: 72 1
debug3: tty_make_modes: 73 0
debug3: tty_make_modes: 74 0
debug3: tty_make_modes: 75 0
debug3: tty_make_modes: 90 1
debug3: tty_make_modes: 91 1
debug3: tty_make_modes: 92 0
debug3: tty_make_modes: 93 0
debug2: channel 0: request shell
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Mon Aug 21 23:17:52 2006 from h02.hostsharing.net
xxx99-acc01(@@)pomo:~$ ls -lsa .ssh
total 16
0 drwxr-xr-x   2 xxx99-acc01 xxx99   68 Aug 21 23:15 .
4 drwxr-x---  18 xxx99-acc01 httpd 4096 Aug  6 12:55 ..
4 -rw-r--r--   1 xxx99-acc01 xxx99 2986 Aug 21 19:47 authorized_keys
4 -rw-r--r--   1 xxx99-acc01 xxx99  231 Aug 21 23:15 known_hosts
xxx99-acc01(@@)pomo:~$ exit
logout
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug2: channel 0: rcvd close
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug3: channel 0: will not send data after close
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
   #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1)

debug3: channel 0: close_fds r -1 w -1 e 6
Connection to xxx99.hostsharing.net closed.
debug1: Transferred: stdin 0, stdout 0, stderr 45 bytes in 11.9 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 3.8
debug1: Exit status 0
xxx99(@@)pomo:~$




-------------------- Mitschnitt für User 2 - Schlechtfall 
-------------------
xxx99(@@)pomo:~$ ssh -vvv xxx99-acc00002(@@)xxx99.hostsharing.net
OpenSSH_3.8.1p1 Debian-8.sarge.4, OpenSSL 0.9.7e 25 Oct 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to xxx99.hostsharing.net [212.21.77.2] port 22.
debug1: Connection established.
debug1: identity file /home/pacs/xxx99/.ssh/identity type -1
debug1: identity file /home/pacs/xxx99/.ssh/id_rsa type -1
debug3: Not a RSA1 key file /home/pacs/xxx99/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/pacs/xxx99/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version 
OpenSSH_3.8.1p1 Debian-8.sarge.4
debug1: match: OpenSSH_3.8.1p1 Debian-8.sarge.4 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 Debian-8.sarge.4
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc(@@)lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc(@@)lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160(@@)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160(@@)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc(@@)lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc(@@)lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160(@@)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160(@@)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 131/256
debug2: bits set: 515/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/pacs/xxx99/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 1
debug3: check_host_in_hostfile: filename /home/pacs/xxx99/.ssh/known_hosts
debug3: check_host_in_hostfile: filename /etc/ssh/ssh_known_hosts
debug3: check_host_in_hostfile: match line 39
debug1: Host 'xxx99.hostsharing.net' is known and matches the RSA host key.
debug1: Found key in /home/pacs/xxx99/.ssh/known_hosts:1
debug2: bits set: 508/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/pacs/xxx99/.ssh/identity ((nil))
debug2: key: /home/pacs/xxx99/.ssh/id_rsa ((nil))
debug2: key: /home/pacs/xxx99/.ssh/id_dsa (0x808c5b0)
debug1: Authentications that can continue: 
publickey,password,keyboard-interactive
debug3: start over, passed a different list 
publickey,password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/pacs/xxx99/.ssh/identity
debug3: no such identity: /home/pacs/xxx99/.ssh/identity
debug1: Trying private key: /home/pacs/xxx99/.ssh/id_rsa
debug3: no such identity: /home/pacs/xxx99/.ssh/id_rsa
debug1: Offering public key: /home/pacs/xxx99/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: 
publickey,password,keyboard-interactive
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: Authentications that can continue: 
publickey,password,keyboard-interactive
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred:
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
xxx99-acc00002(@@)xxx99.hostsharing.net's password:
debug3: packet_send2: adding 48 (len 68 padlen 12 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: ssh_session2_setup: id 0
debug2: channel 0: request pty-req
debug3: tty_make_modes: ospeed 38400
debug3: tty_make_modes: ispeed 38400
debug3: tty_make_modes: 1 3
debug3: tty_make_modes: 2 28
debug3: tty_make_modes: 3 127
debug3: tty_make_modes: 4 21
debug3: tty_make_modes: 5 4
debug3: tty_make_modes: 6 0
debug3: tty_make_modes: 7 0
debug3: tty_make_modes: 8 17
debug3: tty_make_modes: 9 19
debug3: tty_make_modes: 10 26
debug3: tty_make_modes: 12 18
debug3: tty_make_modes: 13 23
debug3: tty_make_modes: 14 22
debug3: tty_make_modes: 18 15
debug3: tty_make_modes: 30 0
debug3: tty_make_modes: 31 0
debug3: tty_make_modes: 32 0
debug3: tty_make_modes: 33 0
debug3: tty_make_modes: 34 0
debug3: tty_make_modes: 35 0
debug3: tty_make_modes: 36 1
debug3: tty_make_modes: 37 0
debug3: tty_make_modes: 38 1
debug3: tty_make_modes: 39 0
debug3: tty_make_modes: 40 0
debug3: tty_make_modes: 41 0
debug3: tty_make_modes: 50 1
debug3: tty_make_modes: 51 1
debug3: tty_make_modes: 52 0
debug3: tty_make_modes: 53 1
debug3: tty_make_modes: 54 1
debug3: tty_make_modes: 55 1
debug3: tty_make_modes: 56 0
debug3: tty_make_modes: 57 0
debug3: tty_make_modes: 58 0
debug3: tty_make_modes: 59 1
debug3: tty_make_modes: 60 1
debug3: tty_make_modes: 61 1
debug3: tty_make_modes: 62 0
debug3: tty_make_modes: 70 1
debug3: tty_make_modes: 71 0
debug3: tty_make_modes: 72 1
debug3: tty_make_modes: 73 0
debug3: tty_make_modes: 74 0
debug3: tty_make_modes: 75 0
debug3: tty_make_modes: 90 1
debug3: tty_make_modes: 91 1
debug3: tty_make_modes: 92 0
debug3: tty_make_modes: 93 0
debug2: channel 0: request shell
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Mon Aug 21 23:16:21 2006 from p549ef7b8.dip.t-dialin.net
xxx99-acc00002(@@)pomo:~$ ls -lsa .ssh
total 16
0 drwxr-xr-x   2 xxx99-acc00002 xxx99   68 Aug 21 23:17 .
4 drwxrwx---  12 xxx99-acc00002 xxx99 4096 Aug 21 23:17 ..
4 -rw-r--r--   1 xxx99-acc00002 xxx99 2986 Aug 21 23:17 authorized_keys
4 -rw-r--r--   1 xxx99-acc00002 xxx99  231 Aug 21 23:17 known_hosts
xxx99-acc00002(@@)pomo:~$ exit
logout
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug2: channel 0: rcvd close
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug3: channel 0: will not send data after close
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
   #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1)

debug3: channel 0: close_fds r -1 w -1 e 6
Connection to xxx99.hostsharing.net closed.
debug1: Transferred: stdin 0, stdout 0, stderr 45 bytes in 304.6 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.1
debug1: Exit status 0
xxx99(@@)pomo:~$

More information about the Support mailing list